BDC 3418 – Metallic Coat Epoxy

BDC 3418 Metallic Coat is a two-component, 100% solids, low-viscosity, self-leveling epoxy floor coating. It flows out and releases bubbles on its own and cures to a tough, high-gloss finish. It can be applied at a wide range of thicknesses and is designed for metallic and decorative epoxy floors and high-build clear coats.

Uses

  • Metallic epoxy floors
  • Decorative and artistic coating systems
  • High-build clear epoxy coatings
  • Showrooms, retail, residential, and commercial interiors

Advantages

  • 100% Solids, SCAQMD VOC Compliant (VOC < 5 g/L)
  • Convenient 2:1 Mix Ratio (A:B by volume)
  • Self-Leveling, Low Viscosity
  • Excellent Bubble Release
  • Excellent Chemical Resistance
  • Suitable for use in USDA and FDA inspected facilities

Typical Properties

Mix ratio (by volume) 2 parts A : 1 part B
Coverage, metallic floors 60–120 sq ft per 1½-gallon kit
Coverage, high-build clear coat 50–100 sq ft per gallon (approx. 16–32 mils)
Pot life 30 minutes (8 oz. @ 77 °F)
Dry to touch 8–12 hours @ 77 °F, 50% RH
Recoat window Within 24 hours
Light foot traffic / vehicles 24 hours / 72 hours
Application temperature 55–90 °F

Priming: Prime with BDC Vapor Seal or BDC 1704 100% solids epoxy primer. For metallic floors, use a pigmented primer in a color similar to the metallic finish.

Packaging:
1½ Gallon Kit (1 gallon Part A to ½ gallon Part B)
3 Gallon Kit (2 gallons Part A to 1 gallon Part B)
15 Gallon Kit (10 gallons Part A to 5 gallons Part B)

Available Colors:
Clear. BDC Metallic Pigments are available separately.

________________________________________

Documents

BDC 3418 Metallic Coat – Technical Data Sheet (TDS)
BDC 3418 Metallic Coat – Part A Resin – SDS
BDC 3418 Metallic Coat – Part B Hardener – SDS