BDC is your resource for high quality floor coatings for commercial, industrial and residential applications. Our premium two-part epoxy, polyaspartic and urethane systems are designed for concrete, metal and masonry – wherever a tough, chemical resistant finish is needed – and are available in a wide range of colors and textures for industrial floors, schools, hospitals, garages and warehouses.
Our products meet California’s strict SCAQMD VOC guidelines.
A two-component, 100% solids, low-viscosity, moisture-tolerant epoxy primer with a 10-11 hour dry time. It primes concrete, metal, wood and many existing coatings, and is an excellent all-around concrete primer/sealer.
A two-component, 100% solids, moisture-tolerant, fast-drying epoxy primer – dry to touch in 2-3 hours at 77°F and 50% humidity. It primes concrete, metal, wood and many existing coatings.
A two-component, 100% solids, moisture-tolerant epoxy primer with excellent adhesion, dry to touch in 4-5 hours at 77°F and 50% humidity. It primes concrete, metal, wood and many existing coatings.
A moisture-tolerant epoxy primer for damp concrete and moisture problems, where most epoxies fail to cure. Its low viscosity and slow cure let it penetrate deeper into the concrete for a stronger bond.
A two-component, 100% solids, high-build, low-odor cycloaliphatic epoxy with a 6-7 hour dry, in clear or pigmented colors. Used for seamless industrial floors in plants, warehouses, commercial kitchens, hangars and garages, and with quartz or paint chips for decorative floors.
A two-component, 100% solids, high-build cycloaliphatic epoxy that is moisture tolerant and chemical resistant, with a slower 11-12 hour dry. Clear or pigmented, it is used for seamless floors in plants, warehouses, commercial kitchens and residential garages, and for decorative chip and quartz systems.
A two-component, 100% solids, low-viscosity, self-leveling epoxy that releases bubbles on its own and cures to a tough, high-gloss finish. Designed for metallic and decorative epoxy floors and high-build clear coats in showrooms, retail, residential and commercial interiors.
A 100% solids, flexible, waterproof and chip-resistant epoxy coating, available clear or pigmented (1065P). Its elongation makes it ideal for joint and crack isolation and crack-bridging membranes, and it stays flexible for the life of the coating.
A 100% solids, multi-functional novolac epoxy built for strong chemical and solvent resistance and constant temperatures up to 225°F. Used in containment areas, tank linings, waste treatment plants and other areas that need a high level of chemical resistance; clear or pigmented.
Two-component, high-solids polyaspartic polyurea topcoats with excellent UV, mar and chemical resistance. BDC 9700 is a fast-dry clear gloss; BDC 9750 gives more working time and a smooth, glassy finish in clear gloss, pigmented gloss or clear satin (9750S).
A low-VOC (<50 g/L), two-component, high-solids aliphatic polyester polyurethane – the most durable, industrial-strength of BDC’s topcoats. Specified as the finish coat over BDC epoxy floors in moderate to severe chemical environments and heavy traffic areas; clear or pigmented (9520P).
A two-component, high-solids, water-based aliphatic polyurethane with UV, mar and chemical resistance – without the smell of solvents. Used as a finish coat over BDC epoxy floors in moderate to severe chemical environments and medium-heavy traffic, indoors or out; gloss or satin (9600S).
A moisture-tolerant epoxy primer for damp concrete and moisture problems, where most epoxies fail to cure. Its low viscosity and slow cure let it penetrate deeper into the concrete for a stronger bond.
A versatile clear sealer and coating formulated for concrete with high alkalinity. It offers excellent water, alkali and efflorescence resistance, with exterior durability and fast drying.
A clear, single-component, solvent-based acrylic sealer and glaze that creates a shiny “wet look.” Used to seal stamped and stained concrete, unglazed brick and tile, and decorative acrylic cement coatings; gloss or satin (1530S).
A versatile clear sealer and coating formulated for concrete with high alkalinity. It offers excellent water, alkali and efflorescence resistance, with exterior durability and fast drying.
A two-component, 100% solids, moisture-tolerant epoxy formulated for bonding river rock, silica sand and other aggregates. The binder for BDC’s Pebble Bond stone & epoxy systems, proven on the market for over 30 years.
BDC’s highest quality stone & epoxy binder – a two-component, 100% solids cycloaliphatic epoxy for bonding decorative pebbles, with an 8-10 hour dry. Used for decorative patios, driveways, pool decks and walkways.
A premium two-part epoxy patching compound in a quick-drying, non-sag gel with high build, toughness and flexibility. Used to patch surface cracks and fill small voids in concrete, block, metal or wood before coating.
A 100% solids, flexible, waterproof epoxy joint filler – the thicker-bodied companion to BDC 1065. Used to fill and bridge control joints, saw cuts and cracks in concrete floors, moving with the slab for the life of the repair.
No products match your search. Call us at +1 (562) 944-6177 or email info@bdcepoxy.com.