BDC 1070P Flex-Fill is a 100% solids, flexible, waterproof epoxy joint filler. It is the thicker-bodied companion to BDC 1065 Flexible Floor Coating: where BDC 1065 is designed as a coating, BDC 1070P is formulated with a higher viscosity for filling and bridging control joints, saw cuts, and cracks in concrete floors. Its elongation allows it to move with the slab, and its flexibility is retained for the life of the repair in both warm and cold weather.
Uses
Advantages
Typical Properties
| Mix ratio (by volume) | 1 part A : 1 part B |
| Viscosity | 3,000 cps |
| Tensile strength / elongation | 2,000 psi / 70–100% |
| Shore D hardness | 52 |
| Pot life | 25 minutes (8 oz. @ 77 °F) |
| Dry to touch | 10–12 hours @ 77 °F |
| Joint size (unfilled) | Up to ½” wide x 1″ deep |
| Yield | 231 cubic inches per mixed gallon |
Packaging:
1 Gallon Kit (½ gallon Part A in a 2-gallon pail, ½ gallon Part B)
2 Gallon Kit (1 gallon Part A in a 3.5-gallon pail, 1 gallon Part B)
The resin is packed in an oversized pail so the hardener and aggregate can be mixed right in the container.
Available Colors:
Concrete Gray and Stone Gray. Custom colors are available with a minimum order quantity.
________________________________________
![]()