AC-310 – High-Viscosity Table & Bar Top Epoxy

AC-310 is a premium, two-component, 100% solids, high-viscosity epoxy coating. Its high-build body holds thickness with controlled flow and cures to an exceptionally strong, glass-like, distortion-free finish. The cured film is clear and high-gloss.

Uses
Engineered for tabletops, bar tops, and counter tops, AC-310 offers the strength, durability, and scratch resistance to stand up to daily use. Its high-build body also makes it well suited to coating wood, picture plaques, photographs, plaster, art, craftwork, and DIY projects.

Advantages

  • 100% Solids – VOC < 5 g/L
  • High-Viscosity, High-Build Body
  • Crystal Clear, High-Gloss, Glass-Like Finish
  • Exceptional Strength and Scratch Resistance
  • Convenient 1:1 Mix Ratio by Volume
  • Dry to Touch in 8–10 Hours
  • Interior Use

Typical Properties

Mix ratio (by volume) 1 part Side A Resin : 1 part Side B Hardener
Mixed viscosity, cps @ 25 °C 3,500–4,000
Pot life (200-g mass @ 25 °C) 20–30 minutes
Dry to touch / through-dry 8–10 hours / 24 hours
Recoat Within 24 hours (after 24 hours, sand and wipe with acetone)
Shore D hardness 82
Coverage (flood coat) 20–30 sq ft per gallon per coat

Packaging:
1 Gallon Kit (2 × 0.5-gallon jugs)
2 Gallon Kit (2 × 1-gallon jugs)
10 Gallon Kit (2 × 5-gallon pails)
110 Gallon Kit (2 × 55-gallon drums)

Available Colors:
Clear. May be tinted with epoxy dyes, metallic pigments, or small amounts of universal colorant.

________________________________________

Documents

AC-310 – Technical Data Sheet (TDS)
AC-310 – Side A Resin – Safety Data Sheet (SDS)
AC-310 – Side B Hardener – Safety Data Sheet (SDS)