BDC 9510 CRU (<100VOC)

BDC 9510 CRU is a two component, high solids, solvenated, aliphatic polyester polyurethane. The U.V. resistant, mar resistant, and chemical resistant nature of this product will cause it to outperform most other types of sealers or topcoats when compared. It is available in a 6 hour cure formula.

Uses:
B.D. Classic 9510 CRU is designed for professional use only and is specified as the finish coat for use in moderate to severe chemical environments or in heavy traffic areas. Apply 9510 CRU as a coating over B.D. Classic 100% solids epoxy primers as well as over all of our epoxy floor coatings. BDC 9510 CRU is also used as a sealer on a variety of other substrates such as Waterproofing Concrete or Masonry, Faux Finish Coating Systems, Industrial Maintenance facilities and Acid Stained Concrete Flooring. Use 9510 CRU on Industrial Floors, Commercial Garage Floors, Decorative Concrete Floors, Restaurant Floors, Food Processing Facilities, Automotive Service Areas.


Advantages:
* SCAQMD VOC < 100 g/l
* Chemical Resistant
* High Gloss Finish
* Color and Gloss Retention
* Impact & Abrasion Resistant
* Aliphatic Polyester Polyurethane
* Versatile – Spray, Roll or Brush

Available Colors:
Clear or Pigmented

 

______________________________________________

BDC 9510 CRU Product Data Sheet

BDC 9510P – Resin – SDS

BDC 9510P – Isocyanate – SDS

BDC 9510- Resin – SDS

BDC 9510- Isocyanate – SDS


Related Products

BDC 9700 Polyaspartic Polyurea
Two-Component Polyaspartic Polyurea Topcoat
BDC 70-30 Aliphatic Urethane
Single-Component Aliphatic Urethane